KT-10 S/C and KT-10R S/C Magnetic Susceptibility/Conductivity Meters
Terraplus is pleased to announce that the KT-10R S/C Magnetic Susceptibility/Conductivity Meter with rectangular coil is available, in addition to the KT-10 S/C with circular coil. Both configurations allow users to simultaneously measure the magnetic susceptibility and conductivity of rock samples or drill cores and include a host of features such as the ability to input depth correlation information, a correction for split and full cores, a data management/visualization software and the GeoVision Android App.
?Three Instruments in One
The KT-10 S/C and KT-10R S/C are three-in-one instruments that can be used in three different configurations:
- Magnetic susceptibility only (like a standard KT-10/KT-10R v2) - Absolute Conductivity only (like a KT-10 C)
- Magnetic susceptibility and conductivity simultaneously
New Rectangular Coil Available
The KT-10 S/C is now available in two different coil configurations: the KT-10R S/C with Rectangular Coil or the standard KT-10 S/C with Circular Coil. The rectangular coil is beneficial for measuring core samples with small diameters as they do not need to be removed from the core box for measurement. The circular and rectangular coils are not interchangeable.
Wide Range Absolute Conductivity Meter
Both configurations have been calibrated using a multi-point algorithm to ensure accurate measurements between inductive and galvanic methods. They can measure conductivities from 1 to 100,000 S/m, while maintaining a sensitivity of 1 S/m.
High Magnetic Susceptibility Sensitivity
The KT-10 S/C and KT-10R S/c have a maximum sensitivity of 1 x 10-6 SI Units on smooth surfaces for magnetic susceptibility measurements.
The KT-10 S/C and KT-10R S/C��_��__��_��_s large internal memories allow the user to input information to correlate every core measurement to its depth. The user can enter information such as borehole I.D., box number, the number of rows in a box, start and end depths, as well as depth intervals. In the Scanner mode, depth intervals can be recorded with the push of a button. All readings between depth intervals are interpolated into the data for reference.
?Split and Full Core Corrections
The KT-10/KT-10R v2 includes a real time diameter correction for both split and full cores. The user can select from a range of drill rod diameters (AQ, BQ, NQ, HQ and PQ) or non-standard ones from 2.4 to 12 cm.
?Measure in SI or CGS and S/m or��_���_.m Units