Description
Dormer PISTON SAMPLER Pulley & Rope Stainless Steel Down Hole Type Threaded with Accessory
This type is similar to the surface, except it has an attachment for extension rods to connect to the top. It does not come with a casing clamp, and the piston can not be removed through the top.
It is used when a sample is required from down an augered hole or from the bed of a body of water.
Downforce is applied via the extension rods and/or through a pulley attached to the T-handle on the extension rods.
The piston is pulled up using a rope attached to the piston rod. Because of the welded fitting for the extension rods, the piston cannot be removed through the top. Similar sizes to surface type are available, but the smaller, the better.
We suggest using the 50mm diameter size only when necessary because it has clearance problems between the piston rod and extension rods. T
This type of Piston Sampler has two main variations. The standard version has the piston rod offset to allow both it and the extension rod connection to fit within the diameter of the sample tube.
The other version has the piston rod in the centre, and the extension rod connection is positioned to protrude partly from the side of the sample tube.
The centralized piston rod gives a more trouble-free operation but is limited in application when used down a hole or casing because of the protruding extension rod connection.
Other minor variations are based on the sample length or sampler length.
The standard version has a sampler length of 1.0m or 1.5m overall, and the sample length is approx 130mm shorter (to allow for a piston).
Dormer can custom manufacture lengths to suit customer requirements.
Estimate shipping